Home Improvements

Tips for Remodeling Your Laundry Room: Layout, Dryer Venting and Leak Protection (2026)

Tips for Remodeling Your Laundry Room: Layout, Dryer Venting and Leak Protection (2026)

Updated October 2026. Layout, venting, leak protection and appliance choices for a laundry room remodel, with US Fire Administration and ENERGY STAR pages read October 30, 2026.

A good laundry room remodel starts behind the machines: a short, clean dryer vent, a drain pan or leak sensor, and outlets the washer and dryer can plug into directly. As of October 2026, the US Fire Administration says failure to clean was the leading factor in home dryer fires, at 31% (2018 to 2020). ENERGY STAR washers use about 14 gallons a load instead of 20.

Jump to: 🏠 Layout · ⏱️ Dryer vent · 🪜 Leak protection · 💲 Machines · 🤝 Selling · ❓ FAQ

Key takeaways

  • USFA: failure to clean caused 31% of home clothes dryer fires in 2018 to 2020.
  • ENERGY STAR washers use about 20% less energy and 30% less water than regular ones.
  • A certified washer can save about $530 in energy over its life, per ENERGY STAR.
  • Plug the washer and dryer straight into a wall outlet, not an extension cord (USFA).

Laundry rooms get remodeled for looks: new cabinets, a folding counter, a nice tile floor. Those are great. But the room also holds a hot appliance that makes lint, and a water appliance that can flood a floor in minutes. Fix the hidden stuff first, then make it pretty.

What layout works for a laundry room remodel?

Start with the space you have. Most laundry rooms fall into one of four types.

Type What works Watch out for
Closet Stacked front-loaders, a shelf above, bifold or pocket doors Airflow; leave the door vented or open during drying
Hallway or galley Side-by-side machines with a counter on top Doors that can’t open when someone walks past
Mudroom combo Machines on one wall, hooks and a bench on the other Wet boots and dirty laundry in one small room
Basement or garage Room for a sink, a drying rack and storage Floor drains, sump pumps and dampness

Measure your machines, not the brochure. Full-size washers and dryers are often about 27 inches wide each, but depth with the hoses and vent attached is what decides whether a door closes. Check the spec sheet for your model and add room behind for the vent to bend gently.

Then think about how you actually do laundry. A folding counter at waist height saves your back. A rod for hang-dry items stops shirts from piling on chairs. A utility sink is the one thing people say they wish they’d added. And good light matters more than you’d think in a room where you’re matching black socks.

Storage is where small rooms win or lose. Upper cabinets keep detergent away from kids and pets. A pull-out hamper or two bins under the counter stop the sorting pile from living on the floor. A narrow rolling cart can slide into the 6-to-8-inch gap that often sits beside the machines. If the room has no window, add an exhaust fan; a dryer and a damp load of towels put a lot of moisture in the air.

How should you vent a dryer safely?

This is the part a remodel should never skip. The US Fire Administration’s appliance page, read October 30, 2026, says failure to clean was the leading factor in home clothes dryer fires from 2018 to 2020, at 31%, based on the National Fire Incident Reporting System.

Lint builds up in two places: the lint screen, and the duct that runs outside. You clean the screen every load. The duct is the one that gets forgotten, especially when it’s long or full of bends.

  • Use a rigid or semi-rigid metal duct, as short and straight as the room allows. Follow the dryer maker’s maximum length.
  • Vent to the outdoors. The EPA’s mold guide also says to vent moisture-producing appliances like clothes dryers outside where possible.
  • Put the dryer where you can pull it out to clean behind it. A remodel is the moment to fix a dryer that’s boxed in.
  • Have the duct cleaned on a schedule, and sooner if drying times creep up.

The USFA also says to plug major appliances, washers and dryers included, directly into a wall outlet. If your new layout leaves the plug out of reach, move the outlet. Don’t solve it with an extension cord. Gas dryers need a gas line and venting set up by a licensed pro.

How do you protect the floor from washer leaks?

A washer that fails usually fails at the hoses. Rubber fill hoses crack with age; braided stainless ones last longer. Swap them during the remodel and add these:

  • A drain pan under the washer, piped to a drain if you can. It’s a must on an upper floor.
  • A water leak sensor on the floor that sounds an alarm or sends a phone alert.
  • An easy-to-reach shutoff for the hot and cold supply. Some people add an automatic shutoff valve.
  • Water-resistant flooring, like tile or luxury vinyl, instead of laminate or carpet.

Pair those with a routine. Our list of ways to keep home appliances working includes the washer checks most people skip.

Which washer and dryer should you buy?

ENERGY STAR’s clothes washer page has the numbers. The average American family washes about 300 loads a year. Certified washers use about 20% less energy and about 30% less water than regular washers. A full-size certified washer uses about 14 gallons a load, against 20 for a standard machine.

Over its lifetime, a certified washer can save about $530 in energy costs. Front-loaders save the most: ENERGY STAR says certified front-load washers use about 50% less energy and water than a top-load agitator washer.

Most of a washer’s energy goes to heating water, about 90% per ENERGY STAR. Washing in cold handles most loads. That’s free, and it works on any machine.

Sell smarter

List your home on the MLS from $99

A flat fee instead of a percentage, and $0 to Beycome at closing. You stay in control of your sale.

Sell your home →

Buy smarter

Get up to 2% back at closing

On homes listed by other agents, Beycome credits you up to 2% of the price at closing (1% kept, $1,499 minimum; not on FSBO homes or homes listed by Beycome sellers).

Buy a home →

Stackable front-loaders free up floor space for a counter or sink in small rooms. If you’re keeping top-loaders, plan the cabinets so the lids still open all the way.

Does a laundry room remodel help you sell?

It helps the house show well and inspect well. Buyers notice a bright, clean laundry room with storage, and inspectors notice a dryer vent full of lint or a hose that’s bulging. A remodel fixes both.

Don’t overspend if you’re moving soon. A fresh coat of paint, a new light, a shelf and a cleaned vent may be enough. Our guide on whether to remodel before you sell helps you decide, and planning a successful house remodel covers budgets and contractors.

Keep it tidy once it’s done. These ways to keep your home clean make listing photos easier too. Buyers will ask about appliances, so it helps to know what buyers check on pre-installed appliances.

When you’re ready to list, Florida sellers can start with a flat fee listing on the Florida MLS, and sellers elsewhere with a Beycome flat fee MLS listing. Either way, your home goes on the major home search sites and the MLS from $99, with $0 due to Beycome at closing. Beycome has helped 22,000+ homeowners save over $225 million (Beycome internal data, October 2026).

Laundry room remodel questions

What should I do first when remodeling a laundry room?

Fix what’s behind the machines: the dryer vent, the outlets, the water supply and a way to catch leaks. Then plan cabinets, counters and finishes.

What causes most dryer fires?

Failure to clean was the leading factor in home clothes dryer fires from 2018 to 2020, at 31%, per the US Fire Administration.

Can I plug a dryer into an extension cord?

No. The US Fire Administration says to plug major appliances, including washers and dryers, directly into a wall outlet.

How much water does an ENERGY STAR washer save?

A full-size certified washer uses about 14 gallons a load against 20 for a standard one, and about 30% less water overall, per ENERGY STAR.

Do I need a drain pan under my washer?

It’s a smart addition anywhere and especially on an upper floor. Pipe it to a drain if you can, and add a leak sensor.

Is a laundry room remodel worth it when selling?

A light refresh usually is: paint, lighting, storage and a clean vent. A full remodel right before a sale is harder to recover.

General home-improvement information. Electrical, gas and plumbing work should be done by licensed pros under local permit rules; follow your appliance maker’s venting and installation instructions.

US Fire Administration, ENERGY STAR and EPA figures as read October 30, 2026.

Prices as of November 2026: Basic $99, Enhanced $399, Concierge $1,399; Basic is $129 in California and Illinois. “$0 at closing” means no Beycome fee at closing; other closing costs, taxes and title fees still apply. Beycome lists in 17 states and DC.

22,000+ homeowners and over $225 million saved: Beycome internal data, October 2026.

Disclosure & Disclaimer

Beycome provides real estate services through affiliated licensed brokerages and has a commercial interest in the services and business models discussed on this blog. Content reflects Beycome’s perspective and may promote our services; it should not be treated as independent or neutral reporting.

Articles are provided for general informational and educational purposes only, not as financial, tax, legal, or investment advice or a recommendation for your particular situation. Reading this blog does not create a brokerage, advisory, or other professional relationship.

Information, opinions, pricing, service descriptions, and comparisons reflect the sources and information available when an article was published or last updated and may change. Although we aim for accuracy, we do not guarantee that all content is complete, current, or applicable to your circumstances. Laws, market conditions, and service availability vary by location. Examples and estimated savings are illustrative, depend on stated assumptions, and do not guarantee individual results.

Verify relevant information directly and consult qualified professionals before making decisions. Beycome services are subject to applicable agreements, eligibility requirements, and state-specific terms.

Artur

Artur is Beycome’s too-smart real estate guru. It learns from the real transaction data behind Beycome listings — list prices, sold prices, days on market, commissions, fees, and local market rules across the states and jurisdictions where Beycome operates — then turns that data into practical guides, comparisons, and market insights built to help people make smarter real estate decisions.

How much can you save selling and buying with Beycome?

If you sell a $400,000 home, you save up to $20,000 compared to a traditional way. And if you buy your next place with us, you also get up to 2% back at closing. Seriously.